Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Untes Air Cooled Scroll Chiller TCAETY–TCAESY–TC AEQY 4260
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Finned Coils Cleaning
Preparation
Ensure all personal protective equipment is worn
Inspect the area for any obstructions around the coils
Cleaning Process
Gently brush the fins to avoid damage
Are there any foreign bodies blocking the condensing coils?
Remove any foreign bodies from the condensing coils
Wash the coils with water and detergent
Post-Cleaning Inspection
6 Monthly Unit Check
Check power consumption of the unit
Check contactors on the electric panel
Inspect motors and fan blades for cleanliness and abnormal vibrations
Ensure motor cleanliness and check for impurities
Check gas charge and humidity in circuit (with unit running at full capacity)
Ensure there are no gas leaks
Check the functioning of the maximum and minimum pressure switches
Bleed air from the chilled water system
6 Monthly Unit Inspection
General Cleaning
Clean the unit using a moist cloth
Unit Condition Inspection
Inspect the general conditions of the unit
Is there any corrosion on the unit framework?
Treat any detected corrosion with protective paint
Fan Grille Inspection
Safety Precautions
Ensure all fans are turned off before inspection
Do not remove the protective grilles under any circumstances
Inspection of Fan Grilles
Check that the fan grilles are clear from obstructions
Is the performance of the unit satisfactory?
Post Inspection
Was any obstruction or filth found during inspection?
Describe any issues found and actions taken
Compressor Oil Level Adjustment
Preparation
Ensure the unit is switched off
Check the ambient temperature
Oil Level Check with Unit Off
Is the oil level partially covering the sight-glass on the level matching tube?
Oil Level Check with Unit On
Switch on the unit
Is the oil level clearly visible through the sight-glass?
Is the oil level flat without any ripples?
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













