

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Untes Air Cooled Scroll Chiller THAETY–THAESY 4230
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
12 Monthly Heat Exchanger Inspection
Safety Precautions
Wear suitable personal protective equipment (PPE)
Initial Inspection
Measure the pressure-drop between the inlet and outlet pipes using a differential pressure gauge
Is the pressure-drop within the specified range?
Cleaning Procedure
Is there any incrustation or clogging detected?
Select the acid to be used for cleaning
Enter the flow rate of the liquid detergent
Fan Grille Inspection
Safety Precautions
Ensure all fans are turned off before inspection
Inspection of Fan Grilles
Check that the fan grilles are clear from obstructions
Is the performance of the unit satisfactory?
Post Inspection
Describe any issues found during inspection
Inspector's signature
6 Monthly Compressor Oil Check
Pre-Inspection
Ensure the compressor is running before inspection
Oil Level Inspection
Record the oil level in the sight-glass
Is the oil level visible through the sight-glass?
Is there a prolonged and excessive presence of foam during operation?
Post-Inspection
Is the oil level within the normal range?
Describe any issues observed during the inspection
Compressor Oil Level Adjustment
Preparation
Ensure the unit is switched off
Verify the following conditions
Oil Level Check with Unit On
Switch on the unit
Is the oil level clearly visible through the sight-glass?
Is the oil level flat without any ripples?
Oil Topping-Up Procedure
Pump-out the compressors
Finned Coils Cleaning
Preparation
Ensure all personal protective equipment is worn
Inspection and Cleaning
Check for and remove any obstructions from the coils
Inspect the edges of the coil for any damage
Is it necessary to wash the coils with detergents and water?
Wash and brush the fins gently with water and soap
Post-Cleaning Actions
Is it possible to clean the coils effectively?
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













