Continental Tumble Dryer KT120L

Affix appropriate country/gas category label if required

Gas Supply Pressure Verification

Enter the current gas supply pressure

Is the gas supply pressure within the acceptable range?

Manifold Pressure Verification and Adjustment

Enter the current manifold pressure

Is the manifold pressure within the acceptable range?

Adjust the gas valve governor/regulator as necessary

Disconnect electrical power from tumble dryer

Close gas shut-off valve to tumble dryer

Verify that the supply inlet pressure is equipped with a pressure regulator

Attach manometer to the correct location based on gas valve type

Remove the burner orifice(s) from the spud holder

Inform the fire department about the upcoming test if the auxiliary output is used to notify them.

Disconnect the auxiliary output if it is used to activate a building sprinkler system.

Verify the connection to the auxiliary output through the H-4 header connection inside the fire suppression control box.

Check the relay rating and ensure it is within 5 Amp, 250VAC max.

Reconnect the auxiliary output if it was disconnected prior to the test.

Inform the fire department that the test is complete if they were notified before the test.

Ensure the appropriate country/gas category label is affixed over the main serial plate designations if required.

Pressure Verification and Adjustment

Measure the current gas supply pressure.

Is the gas supply pressure within the acceptable range?

Adjust the gas supply pressure if necessary.

Refer to Figure 12 for guidance during the adjustment process.

Technician's signature to confirm completion of the procedure.

Ensure the dryer is used for drying water washed fabrics only.

Confirm no articles containing foam rubber, plastic, or rubber-like materials are in the dryer.

Ensure no articles soiled with cooking oil are in the dryer.

Ensure no articles soiled with flammable liquids or cleaning solvents are in the dryer.

Remove debris from the lint screen filter.

Clean inside of the lint filter compartment.

Ensure the lint filter is cleaned daily.