Conair Carousel Plus Dryer MDCW50

Turn off the conveying function

Remove the filter housing cover

Clean or replace the filter cartridge as necessary

If using compressed air, ensure compliance with OSHA and other safety regulations

Replace the filter cartridge and the filter housing cover

Ensure compliance with OSHA and other safety regulations when using compressed air

Protect yourself from hot surfaces inside and outside the dryer and drying hopper

Push down and turn the top of the filter housing clockwise to remove

Remove the filter cartridge from the filter housing

Choose an action for the filter

Describe the frequency of filter cleaning based on material processed

Inspect hoses and hose connections for damage, kinks, or loose clamps

Replace any damaged or worn hoses

Reposition and tighten loose hose clamps

Clean and check the filter for clogging or holes

Ensure you have the necessary equipment

Contact Conair Parts if necessary

Dewpoint Check for Models MDCW 15-100

Connect portable dewpoint meter to the dewpoint check port of the dryer

Turn on the portable instrument and ensure positive airflow through the sensor

Monitor the readout and allow time for stabilization

Refer to Troubleshooting section if dewpoint is not satisfactory

Disconnect the main power supply

Open the electrical enclosure door

Fuse Inspection and Replacement

Replace the fuse with the same type and rating if necessary

Refer to the wiring diagrams for specific electrical components