BRYANT Gas Heat Rooftop Package 581JT24M

Inspection of Air Hood Inlet Screens

Check the following for cleanliness

Is cleaning required for any of the screens?

Cleaning of Air Hood Inlet Screens

Remove the screens for cleaning

Clean screens with hot low-pressure water and soft detergent

Replace all screens before restarting the unit

Verify flow direction arrows on each filter frame

Apply the appropriate lockout/tagout procedures

Remove the condenser-fan assembly (grille, motor, and fan)

Check heat exchanger flue passageways cleanliness

Record heating temperature rise

Press the controller’s test/reset switch for two seconds

Verify that the controller’s Trouble LED flashes

Air Filters and Screens Inspection

Check the presence of the following filters and screens

Are all filters and screens in place?

Access the return air filters through the lift-out panel above the evaporator/return air access panel.

Are the return air filters disposable fiberglass media type?

Inspect the condition of the return air filters.

Replace or clean the return air filters if necessary.