Advantage Temperature Controller SRV-635

Consult with Advantage Service Department to determine if unit can be converted

Items Requiring Replacement or Rewiring

Identify items for replacement or rewiring

Field Voltage Changeover Procedure

Disengage operations and verify all system pressure is relieved

Verify unit’s pressure gauges read '0'

Shut down unit operations according to section 3.4 in the manual

Ensure proper lock-out procedures are followed

Is the system pressure eliminated and the unit’s pressure gauges reading '0' pressure?

Drain unit by removing the pump casing drain plug

Remove the capillary connection from the cooling cylinder to the pressure switch

Remove the brass elbow mounted on the pressure switch

Remove the electrical connections to the pressure switch

Unboxing and Initial Inspection

Unbox the unit before accepting delivery

Document any evident damage on the delivery receipt

Refuse the shipment if there is significant damage

Take photographs of any suspected damage

Follow proper procedures for reporting damage

Disengage operations and ensure all system pressure is relieved

Verify the unit’s pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug

Did the yellow Alert icon disappear?

Stop process operations as described in section 3.4 of the manual

Is all process pressure relieved and the unit’s pressure gauges read '0' pressure?

Drain the unit by removing the pump casing drain plug

Is the unit drained below the sensor probe mount?

Disconnect the sensor probe service plug