Advantage Temperature Controller SRV-1645

Disengage process operations and relieve all system pressure.

Disengage main power supply and verify the Power light on the display is 'off'.

Remove the lift-off access panel and set aside.

Remove the necessary panels to gain access to the pump motor.

Drain machine by removing the pump casing drain plug.

Remove the three motor wire leads from the motor wiring terminals and map the wire terminal locations.

Disengage operations and ensure all system pressure is relieved

Verify the unit’s pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug

Unboxing and Initial Inspection

Unbox the unit before accepting delivery

Document any evident damage on the delivery receipt

Take photographs of any suspected damage

Follow proper procedures for damage claims

Consult with Advantage Service Department to determine if unit can be converted

Consult factory for other power conversions

Items Requiring Replacement or Rewiring

Check items for replacement or rewiring

Field Voltage Changeover Procedure

Disengage operations and verify all system pressure is relieved

Shut down unit operations according to section 3.4 in the manual

Ensure proper lock-out procedures are followed

Ensure system pressure is eliminated and the unit’s pressure gauges read '0' pressure

Drain unit by removing the pump casing drain plug

Remove the capillary connection from the cooling cylinder to the pressure switch

Remove the brass elbow mounted on the pressure switch

Remove the electrical connections to the pressure switch