Advantage Temperature Controller SRV-1075

Describe the function of the temperature probe

Explain the automatic calibration process

Is the sensor probe error indicated by three dashed lines on the temperature display?

Shake out the water from the connection

Inspect heater contactor for signs of wear or pitting

Is the heater contactor cycling frequently?

Replace heater contactor if wear or pitting is observed

Inspect pump motor starter for signs of wear or pitting

Replace pump motor starter if wear or pitting is observed

Ensure all components are not overheating

Disengage process operations and relieve all system pressure

Disengage main power supply and verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Remove the necessary panels to gain access to the pump motor

Drain machine by removing the pump casing drain plug

Remove the three motor wire leads from the motor wiring terminals and map the wire terminal locations

Unbox the unit before accepting delivery

Document any evident damage on the delivery receipt

Did you refuse the shipment due to damage?

Take photographs of any suspected damage

Disengage operations and ensure all system pressure is relieved

Verify the unit’s pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug