Advantage Temperature Controller SRV-1635

Inspect heater contactor for signs of wear or pitting

Is the heater contactor in good condition?

Inspect pump motor starter for signs of wear or pitting

Is the pump motor starter in good condition?

Ensure all components are cool before inspection

Replace any worn or pitted contacts

Disengage operations and ensure all system pressure is relieved

Verify the unit’s pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug

Disengage process operations and relieve all system pressure

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Remove the necessary panels to gain access to the pump motor

Drain machine by removing the pump casing drain plug

Unboxing and Initial Inspection

Unbox the unit before accepting delivery

Take photographs of any suspected damage

Describe the suspected damage in detail

Disengage process operations according to section 3.4

Ensure coolant pressure gauge reads '0'

Is the water system flow shut off?

Follow all lockout/tagout procedures

Remove or open any access cover panel and set aside

Gain access to the make-up solenoid valve