Advantage Temperature Controller SRV-1045

Disengage operations and ensure all system pressure is relieved

Verify the unit’s pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug

Disengage process operations according to the procedure outlined in section 3.4.

Ensure coolant pressure gauge reads '0'.

Follow all lockout/tagout procedures.

Remove or open any access cover panel and set aside to gain access to the make-up solenoid valve.

Consult with Advantage Service Department to determine if unit can be converted. Record consultation details.

Record Serial Number and call 317-887-0729 for conversion eligibility.

Items Requiring Replacement or Rewiring

Identify items for replacement or rewiring

Field Voltage Changeover Procedure

Disengage operations and verify all system pressure is relieved and gauges read '0'.

Shake out the water from the connection

Did the yellow Alert icon disappear?

Stop process operations as described in section 3.4 of the manual

Ensure all process pressure is relieved and pressure gauges read '0' pressure

Drain the unit by removing the pump casing drain plug

Shut down unit operations according to section 3.4 in the manual

Ensure proper lock-out procedures are followed

Is the system pressure eliminated and the unit’s pressure gauges reading '0'?

Drain unit by removing the pump casing drain plug

Remove the capillary connection from the cooling cylinder to the pressure switch

Remove the brass elbow mounted on the pressure switch

Remove the electrical connections to the pressure switch