Advantage Temperature Controller SRV-675

Inspect heater contactor for wear or pitting

Inspect pump motor starter for wear or pitting

Check for overheating signs on components

Replace heater contactor if wear or pitting is found

Replace pump motor starter if wear or pitting is found

Verify all components are functioning properly after inspection

Record any issues found during inspection

Disengage process operations and relieve all system pressure.

Disengage main power supply and verify the Power light on the display is 'off'.

Remove the lift-off access panel and set aside.

Remove the necessary panels to gain access to the pump motor.

Drain machine by removing the pump casing drain plug.

Remove the three motor wire leads from the motor wiring terminals and map the wire terminal locations.

Disengage operations and ensure all system pressure is relieved

Verify the unit’s pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug

Consult with Advantage Service Department to determine if your unit can be converted. Record the outcome.

Items Requiring Replacement or Rewiring

Check items that require replacement or rewiring

Field Voltage Changeover Procedure

Disengage operations and verify all system pressure is relieved and the unit’s pressure gauges read '0'.

Disengage main power supply and verify the Power light on the display is 'off'.

Unboxing and Initial Inspection

Unbox the unit before accepting delivery

Take photographs of any suspected damage

Follow proper procedures for damage claims

Keep detailed records of the damage and claims process