Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Quincy Compressor 240

Create an account to install this asset package.

Maintenance Plans for Quincy Compressor Model 240

Integrate maintenance plans directly into your work orders in MaintainX.

Pressure Switch Adjustment

Preparation

Ensure the compressor is connected to a power supply

Verify that the compressor is not in automatic stand-by mode

Pressure Switch Adjustment

Remove the pressure switch cover

Record the current air pressure reading

Is the compressor running?

Adjust the spring loaded adjustment screw

Record the new air pressure reading

Run this procedure

1 Daily Compressor Check

Initial Checks

Check oil level in crankcase

Drain liquid from the air receiver and moisture trap

Startup Procedure

Turn on cooling water (watercooled units)

Jog the starter button and check compressor rotation

Prepare continuous run units for starting by adjusting the pilot valve

Start compressor per factory instructions

Operational Checks

Run this procedure

Initial Compressor Inspection

Inspect Compressor Equipment

Inspect compressor equipment for damage during shipment

Was any damage found during inspection?

Carrier Inspection and Claim

Demand an inspection from the carrier if damage is found

Ask the carrier how to file a claim for shipping damages

Refer to SECTION 3, Freight Damage for complete details

Examine Shipping Containers

Examine every carton and crate upon receipt

Run this procedure

Initial 100 Hours / 1 Months Oil Change

Pre-Operation Checks

Ensure all necessary parts are in place

Check the lubricant level in the crankcase

Lubricant Replacement

Has the compressor operated for 100 hours or 1 month?

Replace the break-in lubricant with QuinCip lubricant

Post-Operation Checks

Is the lubricant level within the recommended range after replacement?

Verify ambient temperature conditions

Run this procedure

1 Daily Air Tank Draining

Preparation

Disconnect & lockout the compressor from the power source (electric models) or disconnect the spark plug wire from the spark plug (gas engine models).

Is the compressor stored in a heated area if subjected to freezing temperatures?

Pressure Reduction

Enter the current air pressure in the tank (PSIG).

Is the air pressure in the tank 30 PSIG or less?

Draining Process

Open the drain valve and allow the moisture and air mixture to drain from the tank.

Close the drain valve once the moisture has been completely drained.

Run this procedure