New London Engineering Conveyor 410

Verify the need for lubricant replacement

Select the appropriate lubricant based on ambient temperature

Select the lubricant brand for AGMA Compound #7

Select the lubricant brand for AGMA Compound #8

Drain the old lubricant from the reducer

Inspect the reducer for any signs of wear or damage

Refill the reducer with the selected lubricant

Check for leaks after refilling

Record the lubricant replacement details

Lock off equipment before maintenance

Setscrews and Drive Mounts Retightening

Support the turntable while lifting

Bearing Removal and Replacement

Mount replacement parts properly

Recheck replacement parts after one day of use

Ensure the table or drive is not overloaded

Enter the air pressure of the drives tire (Model 181-Turntable)

Is the air pressure within the recommended range?

Select the type of bearings present

Are the bearings permanently lubricated?

Select the lubricant used for lubrication

Was the lubrication performed without over-lubricating?

Clean off grease zerk fittings before lubrication

Ensure the turntable is powered off

Gather necessary tools and replacement parts

Loosen the table bearing set screws

Replace the caster with a New London Engineering replacement part