New London Engineering Conveyor 220

Ensure all mounting bolts are tightened securely

Check that the reducer sprocket is installed as close to the reducer as possible

Is the reducer clean for better heat dissipation?

Is the oil level at the bottom of the threaded hole of the level plug?

Is synthetic oil used without mixing with regular oil?

Inspect Shipment for missing pieces

Check conveyor levelness and true-ness

Verify if the gearmotor requires lubricant change

Select the ambient temperature range

Select the lubricant based on the ambient temperature

Drain the old lubricant from the reducer

Dispose of the old lubricant according to environmental regulations

Fill the reducer with the selected lubricant

Check for any leaks after filling

Record the date and hours of lubricant replacement

Ensure the turntable is powered off

Gather necessary tools and replacement parts

Loosen the table bearing set screws

Replace the caster with a New London Engineering replacement part

Support the turntable while lifting

Bearing Removal and Replacement

Mount replacement parts properly

Recheck replacement parts after one day of use

Ensure the table or drive is not overloaded