Mazak Vertical Machining Center Nexus 510C-II 5X

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

Check the results of maintenance work in the presence of the person in charge.

Stop all machine operation before cleaning the machine or the surrounding area.

Warning: Set the main power disconnect switch to the “OFF” position before removing/mounting the axis way covers or clearing chips from the cover.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work. This will eliminate the possibility of the machinery being accidentally started by someone else.

After the power has been switched off for a short while, check the voltage with a multimeter or similar instrument to make sure that there is no residual voltage. Also discharge the capacitors.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

Do not remove or modify limit switches, proximity switches, or other safety devices.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Always switch off the main power disconnect switch and lock it before replacing bulbs or other electrical equipment, and use products with the same specifications as the original.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

Be absolutely certain to use the specified and standardized parts as replacement or consumable parts so as to maintain the as-shipped machine specifications. We take no responsibility for any personal accidents or machine trouble due to inobservance of this warning

- Always switch off the main power disconnect switch and lock it before carrying out any maintenance work. This will eliminate the possibility of the machinery being accidentally started by someone else.

- After the power has been switched off for a short while, check the voltage with a multimeter or similar instrument to make sure that there is no residual voltage. Also discharge the capacitors.

- Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

- Do not remove or modify limit switches, proximity switches, or other safety devices.

- When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

- Always switch off the main power disconnect switch and lock it before replacing bulbs or other electrical equipment, and use products with the same specifications as the original.

- Do not start the machine until all of the covers removed for maintenance have been refitted.

- Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

Follow the instructions on the instruction plate concerning the brands of oil to be used, lubrication points, amount to be used, and oil change intervals.

Warning: Shut off the power before changing the hydraulic oil.

When replenishing oil, use only the oil specified by Yamazaki Mazak.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

Do not remove or modify limit switches, proximity switches, or other safety devices.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Always switch off the main power disconnect switch and lock it before replacing bulbs or other electrical equipment, and use products with the same specifications as the original.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

Be absolutely certain to use the specified and standardized parts as replacement or consumable parts so as to maintain the as-shipped machine specifications.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.