Mazak Vertical Machining Center Nexus 410B-II

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

Check the results of maintenance work in the presence of the person in charge.

Stop all machine operation before cleaning the machine or the surrounding area.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

Check the results of maintenance work in the presence of the person in charge.

Stop all machine operation before cleaning the machine or the surrounding area.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

Check the results of maintenance work in the presence of the person in charge.

Stop all machine operation before cleaning the machine or the surrounding area.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

WARNING: Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

WARNING: When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

WARNING: Do not start the machine until all of the covers removed for maintenance have been refitted.

WARNING: Wipe up any water or oil spills immediately, and keep the maintenance area and the workplace clean and tidy at all times.

WARNING: Be absolutely certain to use the specified and standardized parts as replacement or consumable parts.

WARNING: Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

WARNING: Do not use compressed air to clean the machine or to remove chips.

WARNING: Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

WARNING: Always switch off the main power disconnect switch and lock it before carrying out any maintenance work.

Maintenance of electrical equipment must be carried out by qualified licensed electrical engineers only.

When carrying out maintenance in high places, always use a suitable ladder or a service platform and always wear a helmet.

Do not start the machine until all of the covers removed for maintenance have been refitted.

Maintenance work should be carried out by qualified personnel in accordance with the instructions of the person in charge.

Use only the specified grades of hydraulic oil, lubricating oil, and grease or their equivalents.

Follow the instructions on the instruction plate concerning the brands of oil to be used, lubrication points, amount to be used, and oil change intervals.

Stop all machine operation before cleaning the machine or the surrounding area.

Shut off the power before changing the hydraulic oil.