Manitowoc Ice Machine SD0602A

Set the toggle switch to the OFF position after ice falls from the evaporator or allow the ice to melt off the evaporator.

Remove top cover for access to descaling and sanitizing solutions.

Place the toggle switch in the CLEAN position and wait for the water trough to refill.

Add the proper amount of ice machine cleaner based on model

Wait until the clean cycle is complete and disconnect power to the ice machine.

Remove parts for cleaning as per the ice machine model guidelines.

Ensure the ice machine is turned off

Disconnect the ice machine from the power supply

Disassemble the following components

Apply descaling solution to the ice machine components

Rinse all components thoroughly after descaling

Disconnect electric power to the ice machine head section and the remote condensing unit at the electric service switches

Check condenser fins for dirt using a flashlight

Blow compressed air or rinse with water from the inside out

Is the condenser clean after blowing air or rinsing with water?

Call a service agent if dirt still remains

Assess water mineral concentration

Drain the water from the machine

Rinse thoroughly with clean water

Gather cleaning supplies suitable for stainless steel

Ensure the area around the ice machine is clear of obstructions

Sponge dust and dirt off the ice machine with mild soap and water

Wipe dry with a clean, soft cloth

Are there any heavy stains on the ice machine?

Remove heavy stains with stainless steel wool if present