Manitowoc Ice Machine SR0500A

Disconnect electric power to the ice machine head section and the remote condensing unit at the electric service switches

Inspect condenser fins for dirt using a flashlight

Is there visible dirt between the condenser fins?

Is the condenser clean after using the selected method?

Call a service agent if dirt remains after cleaning

Wear rubber gloves and safety goggles (and/or face shield) when handling Ice Machine Cleaner or Sanitizer.

Ensure Manitowoc approved Ice Machine Cleaner/Descaler and Sanitizer are used.

Read and understand all labels printed on bottles before use.

Remove front door and top cover for access.

Set the toggle switch to the OFF position after ice falls from the evaporator or allow ice to melt off.

Remove all ice from the bin/dispenser.

Assess water mineral concentration

Drain the water from the machine

Move the ICE/OFF/CLEAN switch to OFF

Disconnect and drain the incoming ice-making water line at the rear of the ice machine

Wait one minute for the water inlet valve to open

Blow compressed air in both the incoming water and the drain openings in the rear of the ice machine to remove all water

Ensure the ice machine is turned off

Gather all necessary cleaning supplies and tools

Disassemble the following components for cleaning

Descale the ice machine components

Sanitize the ice machine components