LNS Hydrobar 6.65

Warning: Never work without a filter or with a pierced filter!

Oil in the collector is reabsorbed?

If oil is not reabsorbed, proceed to clean the filter.

If filter is not cleaned successfully, replace the filter.

If filter is not replaced successfully, report to the maintenance team.

Bars cleaned before loading them on the feed system magazine?

If bars are not cleaned, clean the bars.

As with any vehicle, machinery, or device, regular cleaning of your bar feed system can only serve to improve its operation and prolong its useful life.

For cleaning on the outside, use a soft cloth and a regular detergent; for the inside, use a cloth or a brush.

However, make sure that the rollers and parts made of synthetic materials do not come into contact with these products.

The use of compressed air for cleaning is not advisable, because particles could become lodged in sensitive areas and impede the proper operation of the bar feed system.

At no time should solvents, such as acetone, or diluents be used for cleaning the bar feed system. At no time should cleaning products come into contact with electrical components.