LNS Air Purifier FOX WS2-1250

Release the safety spring and open the latches

Use the provided handle to lift the movable casing until it opens completely

CAUTION: Unit integrity. Cleaning must not be done with metal tools such as spatulas, brushes or other abrasive objects which may remove or damage the protective layer and sealing of the walls and bottom of the unit.

Remove the top and the prefilter microexpanded metal (if installed)

If necessary, clean the prefilter microexpanded metal with a brush

Open the velcro closure and remove the prefilter media

Remove any sealant residue using a sharp blade

Degrease the contact surfaces on the fixed casing with alcohol or other degreasing product

Dry the contact surfaces completely

Prepare the seal and check that it is the proper length

Apply a light layer of cyanocrylate (Loctite or similar product) to the contact surface and make the seal adhere, ensuring it is positioned perfectly along the perimeter.

Liquid exhausting tube cleaning

Sign off on the air purifier maintenance

1. Prefilter Compartment Cleaning

3. Liquid exhausting tube inspection.

CAUTION: Personal safety. Do not remove the main filter for any reason while the unit is on. Removing the main filter while the unit is on will expose you to hazards of a mechanical nature (dragging, cutting, shearing etc.) due to rotation of the impeller.

To prevent the filter from being removed manually by unauthorised personnel, tighten the nut on the main filter with a tool.

Pressure level given by the pressure gauge located beside the control panel.

Note: The initial pressure values (with clean filters) are indicative and may vary due to extraction system features. (tube diameter and length, curves, valves, etc.)

Check if the main filter stage is clogged

Sign off on the main filter stage maintenance