LNS Bar Feeder SL65 S

DANGER: Electrical hazard! Danger of death by electrocution! Only qualified electricians are authorized to intervene on the electric circuit. If there is a fault that you believe is electrical, contact LNS or a local representative.

WARNING: Moving parts pose a risk of injury! Crushing and cutting hazards. Always unplug the power plug and shut off the air supply before removing the cover. Never operate the machine without having reinstalled the safety guards in terms of the maintenance work.

Hydraulic equipment - Check the oil level as well as cleanliness.

Emergency STOP button - Check that the component is working properly.

Pneumatic Condensate Collector - Check for condensate

Pneumatic Lubricator - Check for oil level.

Sign off on the weekly bar feeder maintenance

DANGER: Electrical hazard! Danger of death by electrocution! Only qualified electricians are authorized to intervene on the electric circuit. If there is a fault that you believe is electrical, contact LNS or a local representative.

WARNING: Moving parts pose a risk of injury! Crushing and cutting hazards. Always unplug the power plug and shut off the air supply before removing the cover. Never operate the machine without having reinstalled the safety guards in terms of the maintenance work.

Hydraulic equipment - Drain and clean the hydraulic tank

Sign off on the hydraulic equipment cleaning

By regularly cleaning your bar feeder, you will be able to optimize its operation and extend its life.

Exterior - Use a soft cloth and a cleaning product

Interior - Use a cloth or brush

Take care to avoid any contact between these products and the rollers and other elements made of synthetic material.

Also, take care to avoid any contact between the cleaning products and electrical components.

NOTICE: Risk of damage to the machine! It is strongly discouraged to clean the machine with compressed air. Particles may remain blocked in sensitive areas and thus compromise the proper functioning of the bar feeder.

NOTICE: Solvent-based cleaning products damage the finishing paint! Never clean the bar feeder with solvents, such as acetone, or thinners.

DANGER: Electrical hazard! Danger of death by electrocution! Only qualified electricians are authorized to intervene on the electric circuit. If there is a fault that you believe is electrical, contact LNS or a local representative.

WARNING: Moving parts pose a risk of injury! Crushing and cutting hazards. Always unplug the power plug and shut off the air supply before removing the cover. Never operate the machine without having reinstalled the safety guards in terms of the maintenance work.

Check the operating pressure of the pneumatic equipment

Sign off on the pneumatic equipment check

DANGER: Electrical hazard! Danger of death by electrocution! Only qualified electricians are authorized to intervene on the electric circuit. If there is a fault that you believe is electrical, contact LNS or a local representative.

WARNING: Moving parts pose a risk of injury! Crushing and cutting hazards. Always unplug the power plug and shut off the air supply before removing the cover. Never operate the machine without having reinstalled the safety guards in terms of the maintenance work.

Bar feeder - Clean the sensors.

Air filtering unit - Check the water level in the decanter.