
The Komatsu Bulldozer D65WX-18 is a robust and versatile piece of heavy machinery designed for earthmoving and construction tasks. Known for its reliability and efficiency, this bulldozer excels in various terrains, making it an essential asset for any construction fleet.
Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Komatsu Bulldozer D65WX-18
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1000 Hourly Bulldozer Maintenance
Warning: Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn injury. Wait until they have cooled down before starting the work.
Warning: The undercover is a heavy part (22 kg (48.5 lb)). Do not open or close the cover just under it.
Remove cover (1) on the lower rear side of the machine.
Place the oil container to catch oil under drain plug (P) (with a slit).
Loosen drain valve (P1) (with a slit) and drain the oil.
After draining the oil, tighten drain plug (P).
Remove the undercover on the lower rear side of the machine.
Remove bolts (2) (2 pieces) on the front side of the machine.
While supporting the cover, gradually remove bolts (3) (2 pieces) on the rear side of the machine.
2000 Hourly Bulldozer Maintenance
Warning: Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn injury. Wait until they have cooled down before starting the work.
Warning: The undercover is a heavy part (22 kg (48.5 lb)). Do not open or close the cover just under it.
Warning: When removing drain plug (5) of the damper case, take care not to get oil over yourself.
Refill capacity: 1.7 l (0.45 U.S.Gal)
Undercover removed from the lower rear side of the machine?
Oil level plug (3) and oil filler plug (4) removed?
Drain plug (5) removed and oil drained?
Drain plug (5) installed after draining the oil?
New oil added until the oil level reaches the bottom edge of oil level plug (3)?
250 Hourly Bulldozer Maintenance
METHOD FOR LUBRICATING
Greasing points of straight tilt dozer and sigma dozer
Lubrication points of straight tilt power pitch dozer and sigma power pitch dozer
Lubricating points of angle dozer
Lubricating points of power angle power tilt dozer
METHOD FOR LUBRICATING EQUALIZER BAR SIDE PIN
METHOD FOR LUBRICATING EQUALIZER BAR CENTER PIN
METHOD FOR CHECKING OIL LEVEL IN FINAL DRIVE CASE, ADDING OIL
METHOD FOR CHECKING BATTERY ELECTROLYTE LEVEL
4000 Hourly Bulldozer Maintenance
REPLACE DEFINED LIFE PARTS
Parts replaced every 2 years or every 4000 hours?
METHOD FOR CHECKING WATER PUMP
Water pump checked for leakage?
METHOD FOR CHECKING STARTING MOTOR
Starting motor checked?
METHOD FOR REPLACING ACCUMULATOR (FOR CONTROL CIRCUIT)
WARNING
Accumulator replaced every 2 years or every 4000 hours?
4500 Hourly Bulldozer Maintenance
Warning: Contact your Komatsu distributor for the following cleaning procedures
KDPF cleaned
AdBlue/DEF tank cleaned
AdBlue/DEF tank mounting portion cleaned
Sign off on the cleaning procedures
Access the parts list for your equipment in MaintainX.
Adblue/Def Filter Kit
6540-71-2320
Adblue/Def Tank Breather Element
421-60-35170
Air Cleaner Element Assembly
600-185-5100
D65Px, D65Wx Power Angle Power Tilt Dozer (Bolt)
02090-11270
D65Px, D65Wx Power Angle Power Tilt Dozer Cutting Edge (Center)
14X-72-51610
Adblue/Def Filter Kit
6540-71-2320
Adblue/Def Tank Breather Element
421-60-35170
Air Cleaner Element Assembly
600-185-5100
D65Px, D65Wx Power Angle Power Tilt Dozer (Bolt)
02090-11270
D65Px, D65Wx Power Angle Power Tilt Dozer Cutting Edge (Center)
14X-72-51610
Adblue/Def Filter Kit
6540-71-2320
Adblue/Def Tank Breather Element
421-60-35170
Air Cleaner Element Assembly
600-185-5100
D65Px, D65Wx Power Angle Power Tilt Dozer (Bolt)
02090-11270
D65Px, D65Wx Power Angle Power Tilt Dozer Cutting Edge (Center)
14X-72-51610
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













