Frick Compressor Unit RWB II-316

Maintenance Schedule / Vibration Analysis

Record the current vibration level of the compressor unit

Is the vibration level within the acceptable range?

Inspect bearings for any signs of wear or damage

Describe any abnormalities found during the inspection

Schedule a follow-up inspection if vibration levels are high

Shut down the unit when changing oil

Refer to the Changing Oil procedure in the manual for detailed steps

Perform oil analysis every 6 months

Conduct initial check at 1000 hours of operation

Participate in a regular, periodic oil analysis program to maintain oil and system integrity

Check oil analysis at 1000 hours of operation

Participate in a regular, periodic oil analysis program

Use only Frick filter elements to avoid warranty issues

Replace Coalescers at 30,000; 60,000 and 90,000 hours of operation

Change oil when changing the coalescer filter element(s)

Change cartridges in oil filters OF-1, OF-2, and OF-3 (if applicable)

Remove and clean applicable strainer elements

Use only Frick filter elements to avoid warranty issues

Refer to the Coalescer Filter Element(s) procedure in the manual for detailed replacement steps