Daikin Air Conditioner Outdoor Unit RKC35PVM4

Waited for 10 minutes after turning off all power supplies?

Remove the screws on the terminal board

Remove the screws and wire fixture

Disconnect connectors from the reactor

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Pull out the discharge pipe temperature thermistor

Ensure the fixture for the thermistor is not lost

Check for sound blanket (back) and remove if present

Pull out the outdoor heat exchanger thermistor and remove the thermistor ASSY

Ensure the clip for the thermistor is not lost

Ensure all power supplies are turned off

Wait for 10 minutes after turning off power supplies

Remove the screws of the reactor

Slide the reactor upward to unfasten the hooks

Remove the screws of the partition plate

Wait for 10 minutes after turning off all power supplies before starting disassembly.

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Prepare wet cloth to extinguish fire immediately in case refrigerant oil catches fire.

Do not discharge refrigerant gas into the atmosphere.

Collect all refrigerant gas before proceeding.

Restore piping using non-oxidation brazing.

Waited for 10 minutes after turning off all power supplies?

Untie the 2 strings and pull out the sound blanket (outer)

Pull out the sound blanket (inner)