BRYANT Gas Heat Rooftop Package 581JE17D

Apply the appropriate lockout/tagout procedures

Remove the condenser-fan assembly (grille, motor, and fan)

Select the tool used for removing surface loaded fibers

Was the tool applied in the direction of the fins?

Ensure no damage to coil surfaces (e.g., bent fin edges or damaged coating)

Routine Cleaning of Coil Surfaces

Use Totaline environmentally sound coil cleaner

Avoided use of coil brighteners, acid cleaning, high pressure washers, and poor quality water?

Two-Row Coils Cleaning Procedure

Inspection of Air Hood Inlet Screens

Check the following for cleanliness

Is cleaning required for any of the screens?

Cleaning of Air Hood Inlet Screens

Remove the screens for cleaning

Clean screens with hot low-pressure water and soft detergent

Replace all screens before restarting the unit

Ensure flow direction arrows are correctly aligned on each filter frame

Economizer or Outside Air Damper Inspection

Check the following components for proper condition

Wear proper protective equipment

Select the tool used for removing surface loaded fibers

Was the tool applied in the direction of the fins?

Routine Cleaning of Evaporator Coil Surfaces

Remove all surface loaded fibers and dirt with a vacuum cleaner

Thoroughly wet finned surfaces with clean water and a low velocity garden hose

Mix Totaline coil cleaner in a 2−1/2 gallon garden sprayer