BINDER Climate Chamber MKT115-400V-C

Ensure the following safety precautions are observed

Turn off the chamber at the main power switch

Is the maintenance being conducted by licensed electricians or authorized experts?

Is the refrigeration system work being conducted by qualified personnel trained according to EN 13313:2010?

Check the status display on the rear panel

Actions Based on Status Display

Turn off the chamber at the main power switch

Ensure the chamber is not wet during operation or maintenance

Confirm the rear panel of the chamber is not removed

Is the maintenance being conducted by a licensed electrician or authorized expert?

Is the refrigeration system maintenance conducted by qualified personnel trained according to EN 13313:2010?

Turn off the chamber at the main power switch and disconnect the power plug.

Wear protective gloves and goggles.

Ensure no water or cleaning agents are spilled over the inner and outer surfaces.

Select the cleaning agents used for exterior surfaces, inner chamber, racks, and door gaskets

Select the cleaning agents used for the instrument panel

Select the cleaning agents used for zinc coated hinge parts and rear chamber wall

Wipe the surfaces with a moistened towel.

Pre-Decontamination Safety Measures

Ensure proper decontamination is performed if contamination by hazardous substances has occurred.

Disconnect the chamber from the power supply.

Select appropriate disinfectants for use

Is there any doubt regarding the suitability of cleaning products?

Contact BINDER service if unsure about cleaning products.