Terex Site Dumper TA35

Suspension Beam and Panhard Bushings - Lube

Wheel Rim Nuts (TA40) - Check torque

Wheel Rim Nuts (TA35) - Check torque

Cab Ventilation Filter - Inspect and clean if required

Drive Belts - Check tension. Adjust if required

Battery Electrolyte - Check level. Add if low

Radiator and Cooling System drained, flushed and refilled

Drivelines (Low Maintenance) checked for leaks and damage

Articulation Pivot Nut torque checked

Fuel Cooler stripped, cleaned and inspected

Charge Air Cooler stripped, cleaned and inspected

Low Maintenance drivelines visually checked for leaking or damaged seals

Coolant Inhibitor - Check inhibitor concentration.

Water Pump - Inspect drain hole. Clean if required

Engine Mounting Bolts - Check torque.

Transmission Mounting Bolts - Check torque.

Engine Crankcase Pressure - Check and record.;

Radiator - Clean and inspect radiator fins.

Fuel Tank - Drain water and sediment from tank.

Transmission Breather - Clean if required.

Wheel Planetaries - Check oil level. Add if low.

Differentials - Check oil level. Add if low.

Seat Belts - Inspect for damage and replace if required.

Note: Replace seat belts at least once every three years, regardless of appearance.

Windscreen Wipers and Washers - Inspect wiper blades and replace if damaged. Top up washer reservoir.

Wheel Rim Nuts (TA40) - After first 10 hours of operation re-torque nuts to 540 Nm (400 lb ft). Check torque every 50 hours (weekly) thereafter.

Wheel Rim Nuts (TA35) - After first 10 hours of operation re-torque nuts to 730 Nm (540 lb ft). Check torque every 50 hours (weekly) thereafter.;