Rheem Water Heater ELDS30

Routine Preventative Maintenance

Ensure the following components are inspected by qualified personnel

Is the sound level of the appliance normal?

Was the electric heating element cleaned?

Temperature Pressure Relief Valve Inspection

Lift and release the lever handle on the temperature pressure relief valve

Allow several gallons to flush through the discharge line to an open drain

Ensure the water heater is turned off and cooled down before inspection.

Check for any signs of corrosion or wear on the anode rod.

Is the anode rod showing significant wear or corrosion?

Is replacement of the anode rod necessary?

Replace the anode rod if necessary, ensuring it is properly installed.

Ensure the anode rod is securely in place after inspection or replacement.

Shut off power to the water heater

Turn off the cold water supply to the water heater

Is the area around the relief valve clear of people?

Open a hot water faucet or lift the handle on the relief valve to admit air to the tank

Attach a garden hose to the drain valve on the water heater

Place the other end of the hose in a bucket or drain

Did the water flow smoothly without any blockages?

Turn off power to the water heater

Turn off water supply to the water heater

Will the water heater be subjected to freezing temperatures?

Drain the water heater and piping if necessary

Check the water heater’s operation and controls

Ensure the water heater is completely filled before operation