

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Raymond Tow Tractor 8610
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
180 Daily / 500 Hourly Battery Maintenance
Warning: This maintenance check requires trained personnel with PPE!
Enter the weight stamped on the battery
Enter the minimum allowable weight on the spec tag
Enter the maximum allowable weight on the spec tag
Is the battery weight within the allowable range?
Inspect all battery connectors and leads for damage and cuts in protective coatings
Check if the battery gates are in position and not damaged
Enter the battery's free play in inches
Is the battery's free play no more than 0.5 inch?
180 Daily / 500 Hourly Brakes Maintenance
Warning: This maintenance check requires trained personnel with PPE!
Enter the stopping distance at 2 to 3 mph (3.2 to 4.8 km/h) empty
Did the pallet truck stop within 2 to 4 feet (0.6 to 1.2 m)?
Enter the stopping distance with a rated load and traveling at top speed
Did the pallet truck stop within approximately one and one-half truck lengths?
Any signs of oil on the pads or rotor?
If oil is present, disassemble brake and clean the rotor and pads.
Enter the brake pad gap
Does the pad gap exceed 0.015 in. (.38 mm)?
180 Daily / 500 Hourly Caster Wheels Maintenance
Enter Deadman Hours
Examine for bond failure
Check for chunking
Inspect for excessive or uneven wear
Inspect bearings for binding or excessive play
Check adjustment of caster wheels
Sign off on the caster wheels maintenance
180 Daily / 500 Hourly Contactor Maintenance
Warning: Ensure the truck is OFF and the battery is disconnected before starting the procedure.
Contactor tips inspected for burnt or pitted surfaces?
Plunger checked for smooth operation with no binding?
Report any issues found during the inspection
Sign off on the contactor maintenance
180 Daily / 500 Hourly Control Handle Assembly Maintenance
Steering function is smooth and responsive, without binding or excess play
Lift/lower function is smooth and controllable
Travel function is smooth and responsive thru full range of acceleration and braking
No codes on display?
Function of all switches
Sign off on the control handle assembly maintenance
Access the parts list for your equipment in MaintainX.
Alcohol-Based Cleaner
990-600/FOF
Anti-Static Kit
1-187-059
Bearings And So Forth (Cold Storage), Grease With Teflon, NLGI 2 (Cartridge)
990-652/002
Bearings And So Forth (Cold Storage), Grease With Teflon, NLGI 2 (Spray)
990-652/001
Bearings And So Forth, Grease, NLGI Grade 2 (10 cartridges per case)
990-620/01
Alcohol-Based Cleaner
990-600/FOF
Anti-Static Kit
1-187-059
Bearings And So Forth (Cold Storage), Grease With Teflon, NLGI 2 (Cartridge)
990-652/002
Bearings And So Forth (Cold Storage), Grease With Teflon, NLGI 2 (Spray)
990-652/001
Bearings And So Forth, Grease, NLGI Grade 2 (10 cartridges per case)
990-620/01
Alcohol-Based Cleaner
990-600/FOF
Anti-Static Kit
1-187-059
Bearings And So Forth (Cold Storage), Grease With Teflon, NLGI 2 (Cartridge)
990-652/002
Bearings And So Forth (Cold Storage), Grease With Teflon, NLGI 2 (Spray)
990-652/001
Bearings And So Forth, Grease, NLGI Grade 2 (10 cartridges per case)
990-620/01
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













