Pompetravaini Pump TC32-200

Is the pump operating without abnormal vibrations or noises?

Check the alignment and conditions

Check the flow in auxiliary supply lines

Verify pump series and bearing type

Is the bearing temperature within normal range (not exceeding 85°C)?

Bearing Maintenance for TMA Pumps

Ensure not to over lubricate the bearings

Sealed Pre-Greased Bearings Check

Inspect sealed pre-greased bearings for any issues

Ensure machine is properly stored as per instructions

Has the storage period exceeded 6 months?

Has the storage period exceeded 12 months?

Completely replace the lubricant

Inspect and clean bearings if necessary

Inspect O-rings and gaskets (replace if necessary)

Is the wear within acceptable limits?

Was the mechanical seal replaced?

Inspect the condition of the shaft sleeve

Is the shaft sleeve in good condition?

Replace the shaft sleeve if necessary

Pour oil directly into the cruet

Ensure oil is not poured into the elbow of the oil-filler or bearing frame plug

Select oil change frequency based on conditions

Is the bearing temperature below 85°C/185°F?