Pompetravaini Pump TC25-200

Ensure the pump is completely stopped before handling

Drain the pump or close the pipes using a valve to prevent sudden rotation

Wait for the pump to cool to avoid contact with high temperature surfaces

Disconnect the power supply and any other connections

Ensure power supply is restored only by the maintenance operator

Ensure the presence of at least two operators during maintenance

Inform the foreman that maintenance is in progress

Use appropriate protective devices

Ensure the following actions are considered

Replace the lubricant completely

Pour oil directly into the cruet, not into the elbow of the oil-filler or bearing frame plug

Select the oil change frequency based on operating conditions

Is the bearing temperature within the normal range (below 85°C/185°F)?

Is the pump operating without abnormal vibrations or noises?

Check the alignment and conditions

Check the flow in auxiliary supply lines

Verify pump series and bearing type

Is the bearing sealed and pre-greased?

Bearing Maintenance for Non-Sealed Bearings

Ensure not to over lubricate the bearings

Measure the bearing temperature