Manitowoc Ice Machine SR1800A

Disconnect electric power to the ice machine head section and the remote condensing unit at the electric service switches

Condenser Inspection and Cleaning

Inspect condenser fins for dirt using a flashlight

Is there visible dirt between the condenser fins?

Is the condenser clean after using compressed air and water?

Call a service agent if dirt remains after cleaning

Blow compressed air through the condenser from the inside out

Remove parts for cleaning/sanitizing

Multiple Evaporator Ice Machines

Remove parts for cleaning/sanitizing

Wear rubber gloves and safety goggles (and/or face shield) when handling Ice Machine Cleaner or Sanitizer.

Ensure Manitowoc approved Ice Machine Cleaner/Descaler and Sanitizer are used.

Remove front door and top cover for access.

Set the toggle switch to the OFF position after ice falls from the evaporator or allow ice to melt off.

Remove all ice from the bin/dispenser.

Place the toggle switch in the CLEAN position and wait for water to flow over the evaporator.

Ensure you have read and understood the manual instructions

Verify that maintenance procedures are not covered by warranty

Consult a qualified service company if more frequent descaling is needed

Ensure Manitowoc Ice Machine Cleaner and Sanitizer are available

Cleaning and Sanitizing Procedure

Disassemble the ice machine and bin for cleaning

Use Manitowoc Cleaner to descale the machine

Gather cleaning supplies suitable for stainless steel

Ensure the area around the ice machine is clear of obstacles

Sponge dust and dirt off the ice machine with mild soap and water

Wipe dry with a clean, soft cloth

Are there any heavy stains on the ice machine?

Remove heavy stains with stainless steel wool, if necessary