Life Fitness Dual Adjustable Pulley OP-DAP

Inspect Hardware. Check for loosening. Tighten as required.

Inspect Frames. Inspect for wear and damage.

Inspect Hand grips. Check for wear and damage.

Visually inspect all hardware for loosening, tampering or wear.

Check jam nut at top of weight stack for tightness.

Check cables for stretch and adjust as necessary by loosening the large Jam Nut on top of the weight stack and by screwing in the Threaded Plug until cable is tight and the weight stack pin goes in all holes easily. Securely tighten the large Jam Nut when finished.

Inspect shrouds for damage and clean as necessary.

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary.

Clean Upholstery with an approved or compatible cleaner

Inspect Cables. Look for wear or damage and proper tension. Pay close attention at bends and attachment points

Inspect Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points

Inspect shrouds for damage and clean as necessary

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner

Visually inspect cables for wear at and around connections and along the entire length of the cable. Always replace at first sign of wear

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary

Adherence to regular and proper cleaning procedures is recommended to preserve the appearance

Clean Hand grips with an approved or compatible cleaner

Wax Frames with a standard, non-abrasive, wax finish

Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000)

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner

Visually inspect cables for wear at and around connections and along the entire length of the cable

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary

Clean the Shrouds with an approved cleaner

Minimize Scratches on the shrouds

Use approved and Compatible Cleaners: PureGreen 24 and Gym Wipes

Clean Guide rods with a cotton cloth

Clean Shrouds with an approved or compatible cleaner

Inspect For paint chips. Fill in immediately with manufacturers touch-up paint

Clean guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Clean tops of bearings at stack and inspect for heavy buildup on rods below the head plate. Lift half of stack and do a visual inspection, then clean as necessary

Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product

Contact Customer Support Services to replace any worn, damaged, or unreadable labels or instructional placards and to ensure that you are always using the latest version of labels and instructional placards

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary

Adherence to regular and proper cleaning procedures is recommended to preserve the appearance