Labconco Biosafety Cabinets 30231xxx2

Confirm if the UV lamp is present in the model

Ensure compliance with local disposal laws for hazardous waste

Is the UV lamp hour meter indicating replacement is needed?

Start the cabinet blower and let it operate for 5 minutes.

Raise the sash to its full open position.

Thoroughly surface decontaminate the UV lamp and the work area of the cabinet.

Perform the following tests as per NSF/ANSI Standard Number 49

Perform user comfort related tests if necessary

Was the cabinet recertified by a qualified technician?

Notes or comments on the certification process

Disinfect interior surfaces with suitable chemical disinfectant

Wipe down interior surfaces with 70% alcohol solution after contact time elapsed

Wipe down the interior surfaces of the cabinet with a suitable disinfectant or 70% ethanol and allow to dry

Periodically lift the work surface and wipe down the area beneath it

Inspect and clean the towel catch located at the rear of the work area, beneath the work surface

Dispose of rubber gloves appropriately

Identify Thrown Circuit Breaker

Check the position of circuit breakers

Is the white barrel of any circuit breaker extended?

Push in the extended white barrel of the thrown circuit breaker

Is the Outlet icon displayed on the Home Screen?

Do the internal outlets have power?

Clean sash glass with suitable glass cleaner

Clean UV lamp with suitable glass cleaner

Enter the Filter Life percentage from the log