Labconco Biosafety Cabinets 30252xxx2

Confirm if the UV lamp is present in the model

Safety and Disposal Instructions

Ensure compliance with local disposal laws for hazardous waste

Consult www.lamprecycle.org for safe handling, recycling, and disposal information

Start the cabinet blower and let it operate for 5 minutes

Raise the sash to its full open position

Perform the following tests as per NSF/ANSI Standard Number 49

Perform user comfort related tests if necessary

Was the cabinet recertified by a qualified technician?

Notes or observations during certification

Clean sash glass with suitable glass cleaner

Clean UV lamp with suitable glass cleaner

Enter the Filter Life percentage from the cabinet blower

Identify Thrown Circuit Breaker

Check if the internal outlets have power when the Outlet icon is displayed on the Home Screen.

Check if the cabinet has power when the System Reset Switch is on.

Identify the thrown circuit breaker(s)

Locate the circuit breaker with the extended white barrel.

Push the extended white barrel back in to reset the circuit breaker.

Verify if the internal outlets have power after resetting.

Wipe down cabinet exterior with 70% alcohol solution

Check all service valves for proper operation (if equipped)

Check the UV Lamp Hour meter and note in log (if equipped)