KSB SE & Co. KGaA Chemical Pump CPKN 65-315

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Secure the pump set to prevent tipping or falling over during assembly/dismantling.

Wear safety clothing and a protective mask, if required.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure all maintenance work is performed by authorised, qualified specialist personnel.

Observe the safety regulations in force at the place of installation

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres

Ensure the pump set cannot be started up unintentionally

Disconnect electrical connections before carrying out work on the pump set

Take appropriate measures to protect persons and the environment when draining fluids

Decontaminate pumps which handle fluids posing a health hazard

Secure the pump (set)/pump parts to prevent tipping or falling over during assembly/dismantling

Maintenance Schedule Preparation

Ensure all safety regulations at the installation site are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started unintentionally and electrical connections are disconnected.

Take appropriate measures to protect persons and the environment when draining hazardous fluids.

Secure the pump or pump parts to prevent tipping or falling during assembly/dismantling.

Ensure maintenance is performed by authorised, qualified specialist personnel.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Observe the safety regulations in force at the place of installation.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluid.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Ensure maintenance, inspection, and installation work is performed by authorised, qualified specialist personnel.

Ensure all safety regulations at the installation site are observed.

Perform maintenance work outside potentially explosive atmospheres.

Ensure the pump set cannot be started unintentionally.

Disconnect electrical connections before starting work on the pump set.

Take measures to protect persons and the environment when draining fluids.

Secure the pump to prevent tipping or falling during assembly/dismantling.

Check the condition of the lubricant regularly.