KSB SE & Co. KGaA Chemical Pump CPKN 65-250

Ensure all safety regulations at the installation site are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started unintentionally and electrical connections are disconnected before work.

Take appropriate measures to protect persons and the environment when draining hazardous fluids.

Secure the pump or pump parts during assembly/dismantling to prevent tipping or falling.

Service the pump set regularly with emphasis on lubricants, shaft seal, and coupling.

Check the lubricant level regularly.

Ensure maintenance work is performed outside potentially explosive atmospheres

Verify that the pump set cannot be started unintentionally

Disconnect electrical connections before starting work

Secure the pump to prevent tipping or falling over during assembly/dismantling

Check the condition of the lubricant

Is the lubricant in good condition?

Describe any issues found with the lubricant

Ensure all safety regulations at the installation site are observed.

Perform maintenance work outside potentially explosive atmospheres.

Ensure the pump set cannot be started unintentionally.

Disconnect electrical connections before starting work on the pump set.

Take measures to protect persons and the environment when draining fluids.

Decontaminate pumps handling hazardous fluids.

Secure the pump parts to prevent tipping or falling during assembly/dismantling.

Ensure compliance with safety regulations at the installation site.

Perform maintenance outside potentially explosive atmospheres.

Ensure maintenance is performed by authorized, qualified personnel.

Disconnect electrical connections before starting work on the pump set.

Secure the pump to prevent tipping or falling during assembly/dismantling.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure the pump set cannot be started unintentionally.

Ensure all safety regulations at the place of installation are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluids.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Ensure maintenance, inspection, and installation work is performed by authorised, qualified specialist personnel.