Greenheck Plenum Fan APM-15

Verify all items are accounted for against the delivery receipt or packing list

Inspect each crate or carton for shipping damage before accepting delivery

Alert the carrier of any damage detected

Make a notation of damage or shortage on the delivery receipt and bill of lading

Contact your sales representative if damage is found

Fan Equipment Storage and Handling

Ensure fans are protected and maintained until installation

Confirm that building supply voltage matches the voltage for which the unit is wired.

Disconnect and lock-out all power switches to fan.

Check all piping and wiring penetrations for water tightness.

Check all fasteners, set screws and locking collars for tightness.

Rotate the fan wheel by hand to ensure no parts are rubbing.

Check for bearing alignment and lubrication.

Check the V-belt drive for proper alignment and tension.

Check all guarding for secure attachment and non-interference with rotating parts.

Disconnect the electrical supply

Remove any dirt accumulation on the wheel or in the housing

Inspect fan impeller and housing for fatigue, corrosion, or wear

Inspect fan for moisture or dirt accumulations

Is there any paint deterioration?

Are there signs of rust on machined parts?

Remove original rust preventive coating with petroleum solvent

Polish remaining rust from surface