Gast Manufacturing Air Motor 1AM-NRV-60

Select the oil type used for lubricating

SPUR AND WORM REDUCERS - Lubrication

Check the oil level in spur gear reducers stored or not operated for a period of time

Ensure gear motors have proper lubrication

Verify oil level is sufficient to prevent performance loss, damage, or failure

Use a 300 ssu at 100°F/38°C turbine quality lubricant

For horizontal operation, remove both plugs and add oil to top hole until other hole overflows

For vertical operation, fill to overflow point of upper most hole

MAINTENANCE - Cleaning the sound absorber

Inspect muffler for non-lubricated operation

Change muffler element to avoid excessive clogging

Disconnect air supply and vent all air lines

Flush product in a well ventilated area

Avoid using kerosene or other combustible solvents

Ensure safety precautions are followed

Disconnect air line and muffler

Select the type of flushing solvent used

Rotate the shaft by hand in both directions for a few minutes

Listen for changes in the sound of the motor

Determine the condition of the motor

Add flushing solvent into motor

If using liquid solvent, pour several tablespoons directly into the intake port

MAINTENANCE - Automatic Lubrication

Check if the unit is fitted with an automatic inline oiler

Adjust inline oiler to feed 1 drop of oil per minute

Ensure not to overfeed oil to prevent exhaust air contamination