

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Gardner Denver Vacuum Pump 1380
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1 Daily Oil Check
Oil Condition Examination
Check for oil discoloration
Check if oil level is rising
Oil Change Decision
Has the oil color or level changed?
Change the oil if changes are observed
Extended Service Life Recommendation
Note to change oil every 3-4 months if no changes are observed
Trap Maintenance
Refrigerant Level Maintenance
Check the refrigerant level in the flask
Is the refrigerant add tube unobstructed?
Trap Saturation Check
Has the pressure in the vacuum system increased?
Trap Cleaning Procedure
Disconnect the trap from the system
Allow the trap to warm up
Rinse off the condensate with a suitable solvent in a fume hood
Shaft Seal Replacement
Preparation
Drain the oil from the pump
Remove the pump pulley and key
Old Seal Removal
Remove screws securing the old seal
Pry the old seal loose with a screwdriver or similar wedge
Discard the old seal and its gasket
Inspection and Cleaning
Inspect all surfaces for damage
3 Monthly Oil Change
Oil Level Check
Check the oil level
Oil Draining and Inspection
Turn off motor for the vacuum pump
Drain the oil into a clear plastic container
Are there contaminants in the oil?
Forced Oil Flushing
Ensure the belt guard is installed
Attach a short hose to the drain valve leading to a clear plastic container
Access the parts list for your equipment in MaintainX.
Shaft Seal: Lip Seal
1401D -01
Shaft Seal: Mechanical Seal
1401D
Dust Cap
41-0612
Air Filter Screen
41-0660
Intake Chamber Cover Gasket
41-0234
Shaft Seal: Lip Seal
1401D -01
Shaft Seal: Mechanical Seal
1401D
Dust Cap
41-0612
Air Filter Screen
41-0660
Intake Chamber Cover Gasket
41-0234
Shaft Seal: Lip Seal
1401D -01
Shaft Seal: Mechanical Seal
1401D
Dust Cap
41-0612
Air Filter Screen
41-0660
Intake Chamber Cover Gasket
41-0234
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













