

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Frigidaire Refrigerator GLHS68EFPW1
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Routine Door Gasket Inspection
Door Seal Inspection
Check that all door seals touch the cabinet on all four sides
Is the refrigerator/freezer door slightly open?
Gasket Condition Assessment
Inspect gaskets for the following conditions
Gasket Maintenance
Clean dirty gaskets with soap and water and a clean soft cloth
Replace worn, cracked, or poorly fitted gaskets
6 Monthly Interior Cleaning
Preparation
Unplug the electrical power cord from the wall outlet
Wipe up any spills immediately
Cleaning Interior and Door Liner
Prepare cleaning solution with 2 tablespoons of baking soda in 1 quart of warm water or use soap and water
Wring excess water out of sponge or cloth before cleaning around controls, light bulb, or any electrical part
Clean interior and door liner with the prepared solution
Door Gaskets and Drawers
Wipe door gaskets with a clean soft cloth and soap and water
Routine Temperature Check
Temperature Measurement
Measure the temperature of the fresh food compartment using a separate thermometer
Measure the temperature of the freezer compartment using a separate thermometer
Temperature Settings Verification
Verify that the fresh food compartment temperature is between 34°F and 40°F
Verify that the freezer compartment temperature is 0°F or lower
Display and Control Check
Check if either digital display is continuously flashing
Switch the display between Fahrenheit and Centigrade using the Mode button
6 Monthly Water Filter Maintenance
General Instructions
Determine the filter model and capacity
Has the refrigerator been unused for a while?
PureSource (RG-100) Filter Replacement
Open freezer door and leave open until filter change is complete
Set ice maker wire signal arm to OFF (up) position or turn On/Off power switch to 'O'
Hold filter cup firmly and unscrew towards left
Rinse out cup under running water
Check the large o-ring in the groove inside the cup; replace if damaged
Routine Ice Dispenser Cleaning
Preparation
Stop ice production
Cleaning the Ice Container
Remove the ice container by lifting up and out
Empty the ice container
Clean the container with mild detergent
Rinse the container with clear water
Allow the container to dry completely before replacing in the freezer
Cleaning the Shelf and Chute
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













