Frigidaire Refrigerator GLHS68EFPB1

Unplug the refrigerator to avoid electrical shock

Wear gloves to protect against broken glass

Identify the location of the light bulb to be replaced

Is it necessary to remove the light cover?

Remove light cover if necessary

Replace with an appliance bulb of the same wattage

Determine the type of water filter model

Has the Filter Status light turned red?

Has the refrigerator been unused for a while?

PureSource (RG-100) Maintenance

Open freezer door and leave open until filter change is complete

Set ice maker wire signal arm to OFF (up) position or turn On/Off power switch to 'O'

Hold filter cup firmly and unscrew towards left

Rinse out cup under running water

Ensure refrigerator and freezer doors are closed for 8 to 12 hours

Verify controls are set to factory presets during cooling period

After 24 hours, assess if temperature adjustments are needed

If adjustments are needed, make small and gradual changes

Check the Air Filter Status Light

Turn off the air filter by pressing the 'Air Filter' button

Replace the fresh food air filter cartridge

Turn on the air filter by pressing the 'Air Filter' button

Reset the air filter by pressing and holding the 'Air Filter' button for 3 seconds

Measure the temperature of the fresh food compartment using a separate thermometer

Measure the temperature of the freezer compartment using a separate thermometer

Have you adjusted the temperature settings recently?

Allow 24 hours for temperatures to stabilize after adjustment

Is either digital display continuously flashing?

If flashing, describe the issue and contact Electrolux service representative