Frigidaire Refrigerator FRS6LF7FM3

Check that all door seals touch the cabinet on all four sides

Is the refrigerator/freezer door slightly open?

Inspect gaskets for the following conditions

Clean dirty gaskets with soap and water and a clean soft cloth

Replace worn, cracked, or poorly fitted gaskets

Determine the filter model and location

Has the Filter Status light turned red?

Has the refrigerator been unused for a while?

PureSource (RG-100 cartridge) Maintenance

Open freezer door and leave open until filter change is complete

Unscrew filter cup towards left and rinse under running water

Check the large o-ring in the groove inside the cup; replace if damaged

Clean smooth handles and exterior surfaces using soap and water and a soft cloth

Avoid using commercial household cleaners, ammonia, or alcohol to clean handles

Avoid using a dry cloth to clean smooth doors

Clean stainless steel front and handles with non-abrasive soapy water and a dishcloth

Rinse with clean water and a soft cloth

Wipe stubborn spots with an ammonia-soaked paper towel, then rinse

Use a non-abrasive stainless steel cleaner and follow manufacturer's instructions

Unplug the electrical power cord from the wall outlet

Clean interior and door liner with baking soda solution or soap and water

Wring excess water out of sponge or cloth before cleaning around controls, light bulb, or any electrical part

Wipe door gaskets with a clean soft cloth and soap and water

Clean drawers and bins with soap and water

Ensure no removable parts are washed in a dishwasher

Stop ice production by lifting the wire signal arm to the 'up' or OFF position (side mounted) or setting the On/Off power switch to 'O' (rear mounted)

Remove the ice container by lifting up and out.

Clean the container with mild detergent and rinse with clear water.

Allow the container to dry completely before replacing in the freezer.

Remove ice chips from the shelf and chute that support the ice container.