Frigidaire Refrigerator GLHS38EGQ1

Connect the refrigerator to the water supply

Fill the water tank by drawing one glass of water

Discard ice made during the first 24 hours

Ensure refrigerator and freezer doors are closed for 8 to 12 hours

Were the controls left at factory settings during the cooling period?

Has the refrigerator been running for 24 hours?

Describe any temperature adjustments made after 24 hours

Clean smooth handles and exterior surfaces using soap and water and a soft cloth

Avoid using commercial household cleaners, ammonia, or alcohol to clean handles

Avoid using a dry cloth to clean smooth doors

Clean stainless steel front and handles with non-abrasive soapy water and a dishcloth

Rinse with clean water and a soft cloth

Wipe stubborn spots with an ammonia-soaked paper towel, then rinse

Use a non-abrasive stainless steel cleaner and follow manufacturer's instructions

Stop ice production by lifting the wire signal arm to the 'up' or OFF position (side mounted) or setting the On/Off power switch to 'O' (rear mounted)

Remove the ice container by lifting up and out

Clean the container with mild detergent

Rinse the container with clear water

Allow the container to dry completely before replacing in the freezer

Unplug the refrigerator before replacing any light bulb

Wear gloves as protection against possible broken glass

Identify the location of the light bulb to be replaced

Is it necessary to remove the light cover?

Remove light cover if necessary

Replace with an appliance bulb of the same wattage