Frigidaire Refrigerator GLHS68EFW1

Stop ice production by lifting the wire signal arm to the 'up' or OFF position (side mounted) or setting the On/Off power switch to 'O' (rear mounted)

Remove the ice container by lifting up and out.

Clean the container with mild detergent and rinse with clear water.

Allow the container to dry completely before replacing in the freezer.

Remove ice chips from the shelf and chute that support the ice container.

Check that all the door gaskets are in place and intact

Do the seals touch the cabinet on all four sides?

Is the refrigerator/freezer door slightly open?

Is the gasket dirty, worn, cracked, or poorly fitted?

Clean dirty gaskets with soap and water and a clean soft cloth

Replace worn, cracked, or poorly fitted gaskets

Allow the refrigerator and freezer to operate with doors closed for 8 to 12 hours

Ensure controls are not adjusted during the initial cooling period

Check if 24 hours have passed since the refrigerator started running

Make small and gradual adjustments to the temperature settings if needed

Allow time for temperatures to change and stabilize after adjustments

Unplug the refrigerator to avoid electrical shock

Wear gloves to protect against broken glass

Identify the location of the light bulb to be replaced

Is it necessary to remove the light cover?

Remove the light cover if necessary

Replace with an appliance bulb of the same wattage

Ensure the ice maker is in the correct position

If water supply is not connected, is the ice maker turned OFF?

Has the refrigerator cooled for several hours?

Did the ice maker start making ice within 24 hours?

Did the ice maker cycle two or three times before making a full tray of ice?