Epson Home Cinema 2150

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers.

Projector turned off and power cord unplugged

To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens.

Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.

Warning: Unplug any charging cables from the glasses before cleaning them.

Caution: Do not use paper towels or any other abrasive materials to clean the glasses.

Glasses unplugged from charging cables?

Soft, dry, lint-free cloth available?

Glasses cleaned without using paper towels or any other abrasive materials?

Sign off on the 3D glasses cleaning

Warning: Let the lamp fully cool before replacing it to avoid injury.

Projector turned off and power cord unplugged?

Projector lamp cooled down for at least one hour?

Screw securing the lamp cover loosened with the provided screwdriver?

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury.

Lamp cover slid out and lifted off?

Screws securing the lamp to the projector loosened?

Old lamp gently pulled out of the projector?

Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

Warning: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.

Select the Reset menu and press Enter.

Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours. Do you want to reset?

Press Menu or Esc to exit the menus.

Sign off on the lamp timer resetting

You need to replace the air filter in the following situations:

• After cleaning the air filter, you see a message telling you to clean or replace it

• The air filter is torn or damaged

You can replace the air filter while the projector is mounted to the ceiling or placed on a table.

1. Turn off the projector and unplug the power cord.

2. Carefully open the air filter cover.

3. Pull the air filter out of the projector.

Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations.