Doosan Lift Truck G25P-3

Hydraulic Return Filter, Breather & Strainer - Check, Change

Transmission Oil, Oil Filter & Strainer - Check, Clean, Change

Lift Chains - Test, Check, Adjust

Carburetor (LP-Gas, Gasoline & Dual Fuel Engine Only) - Adjust, Clean

Inspect Coolant Hoses (LP Engine Only)

LP Regulator/Converter Inspection (LP Engine Only)

Inspect Foot Pedal Operation (G420F(E)/G424F(E) Only)

Inspect Engine for Exhaust Leaks

Walk-Around Inspection - Inspect

Engine Valve Lash (DB33A Diesel Engine Only) - Check, Adjust

Fuel Tank Filter Cap and Screen (If Equipped) - Clean

Seat, Hood Latch & Support Cylinder - Check, Lubricate

Fuses, Bulbs, Circuit Breaker & Relay - Change, Reset

Fuse & Relay (G424E/G430E Only)

Priming the Fuel System (Diesel Engine Only)

Tires and Wheels (D, G-Series) - Inspect, Check

Carriage Roller Extrusion – Adjust;

Loosen the bolts of the hydraulic tank top plate assembly

Remove the return filter from tank top plate assembly

Install the tank top plate assembly and fasten the bolts

Start the engine and operate the hydraulic controls, and the steering system, through a few cycles to fill the lines. Look for oil leaks

Stop the engine and check the oil level. With all cylinders retracted, maintain the oil level to the FULL mark on the dip stick/filter cap assembly

Sign off on the replacement procedure

Engine Oil & Filter (Diesel Engine Only) - Change

Transmission Oil, Oil Filter & Strainer - Check, Clean, Change

Transmission oil, oil filter and strainer checked, cleaned and changed?

Parking brake tested and adjusted?

Sign off on the initial 50-100 hours/1 weekly service