The Delfield Company Refrigeration Equipment 18672PTB

Ensure all acidic items are stored properly

Are all pans in place during operation?

Is the unit operated with minimal door openings?

Is the top section free from overnight storage?

Remove products from pans for overnight storage

Prepare warm soapy water for cleaning

Clean the gasket with warm soapy water

Avoid using full strength cleaning products on the gasket

Ensure no sharp tools or knives are used during cleaning

Check if gasket replacement is necessary

Remove the old gasket by pulling it out of the groove

Press the new gasket into place in the groove

Understanding Stainless Steel Properties

Acknowledge the properties of stainless steel and its composition

Understand the importance of the chromium protective layer

Ensure the following cleaning materials are available

Confirm no steel pads, wire brushes, or scrapers will be used

Use soap and water for routine cleaning

For extreme stains or grease, use a non-abrasive cleaner and plastic scrub pad

Remove product from the rail to the refrigerated base

Turn off the rail to save energy and defrost

Ensure the on/off switch is shut off for standard wrapped refrigerated rail units

Ensure the LiquiTec rail is shut off for defrosting

Rotate product every four hours to maintain quality

Ensure awareness of refrigeration lines location when adding items to the unit

Inspect door hinges for looseness or sagging

Tighten screws on hinge brackets if necessary

Are the doors operating smoothly without sagging?

Is the airflow unrestricted in the storage area?

Ensure no hot pans are placed on/against the blue ABS liner

Avoid throwing items into the storage area