The Delfield Company Refrigeration Equipment 18691BST

Ensure the refrigeration unit is turned off

Gather necessary cleaning tools

Select the cleaning method used

Clean the condenser fins thoroughly

Is the condenser coil free of blockages?

Are there any visible damages to the condenser coil?

Pull the track out to the specified distance

Align rear white roller with the half moon notch

Rotate the track away from the outer track profile

Cleaning Intermediate Drawer Tracks

Are the intermediate drawer tracks dishwasher safe?

Clean tracks in a sink with detergents and a soft bristle brush if not using a dishwasher

Ensure each roller is thoroughly cleaned

Ensure all acidic items are stored properly

Are all pans in place during operation?

Is the unit operated with minimal door openings?

Is the top section free from overnight storage?

Remove products from pans for overnight storage

Inspect hinges for looseness or sagging

Tighten screws on hinge brackets if loose

Are the doors properly aligned after tightening?

Is the airflow unobstructed in the storage area?

Ensure no hot pans are placed on/against the blue ABS liner

Avoid throwing items into the storage area

Remove product from the rail to the refrigerated base

Turn off the rail unit to save energy and defrost

Ensure the LiquiTec rail is shut off for defrosting

Check the low-pressure control setting for proper rail temperature

Verify the thermostat setting on LiquiTec rail for proper temperature control

Rotate product every four hours to maintain quality