The Delfield Company Refrigeration Equipment 18648PTL

Understanding Stainless Steel Properties

Acknowledge the properties of stainless steel and its composition

Understand the importance of the chromium protective layer

Select appropriate cleaning tools

Select appropriate cleaning solutions

Ensure no steel pads, wire brushes, or scrapers are used

Use soap and water for routine cleaning

Remove product from the rail to the refrigerated base

Turn off the rail to save energy and defrost it

Verify control settings for rail temperature

Ensure the rail on/off switch is turned off at night

Rotate product every four hours to maintain quality

Inspect hinges for looseness or sagging

Tighten screws on hinge brackets if necessary

Are the doors properly aligned after tightening?

Do the doors open and close smoothly?

Ensure no hot pans are placed on/against the blue ABS liner

Avoid throwing items into the storage area

Check if the drain tube is connected to the evaporator drain pan.

Ensure the end of the drain tube is in the condensate evaporator in the machine compartment.

Is there water accumulation inside the unit?

Is there water collecting underneath the unit?

Unit Leveling and Drain Line Check

Ensure all drain lines are free of obstructions.

Pull the track out to the specified distance (1.50” to 2.00” or 3.8cm to 5.0cm)

Line up the rear white roller with the half moon notch in the outer profile

Rotate the track away from the outer track profile to free the intermediate profile

Cleaning Intermediate Drawer Tracks

Are the intermediate drawer tracks dishwasher safe?

Clean the intermediate tracks in a sink with detergents and a soft bristle brush if not using a dishwasher

Ensure each roller is thoroughly cleaned